CHEM LINK

NovaLink SL 10.1 oz Tubes (CASE of 24) | ChemLink F1234

In stock
Check for local delivery
As low as $162.00

ChemLink NovaLink SL Self-Leveling Joint Sealant is a moisture cure, construction sealant specially formulated for application in damp or dry horizontal concrete expansion joints such as roof decks, concrete walkways, courtyards, plaza decks, stairwells, sidewalks, balconies, parking structures, and surrounding fountains and swimming pools. Self Leveling NovaLink has excellent self leveling properties and smooth finish allow NovaLink SL to be installed without tooling.

Benefits of NovaLink SL:

  • SOLVENT FREE 100% solids, will not shrink
  • GUN GRADE self-leveling
  • COLOR STABILITY good stability, will not suntan
  • Paintable within 24 hours
  • +/- 25% joint movement
  • QUANTITY: 24-Pack of ChemLink NovaLink SL Self Leveling Joint Sealant 10 ounce caulk in cartridge tubes.
  • COLOR OPTIONS: Gray, White, Black, or Stone
  • MADE IN THE USA | ISO 9001:2015 certified processes
Financing Available for orders over $1,000

Chem Link NovaLink SL is a self-leveling, moisture cure, construction sealant specially formulated for application in damp or dry horizontal concrete expansion joints. NovaLink SL levels to a smooth level finish and bonds well to masonry, wood, aluminum, steel, slate, natural stone, clay tile, asphalt, and most other construction materials. NovaLink Self Leveling Sealant is designed for application on horizontal joints in concrete construction such as driveways, sidewalks, plaza decks, balconies, stairwells, parking structures, roof decks, swimming pools, waterfalls and ornamental fountains. NovaLink SL cures rapidly to a solid rubber seal that can accommodate 25% joint movement. Its unique polyether cure chemistry allows NovaLink SL to be installed on damp concrete or in damp weather conditions without “outgassing” or forming CO2 bubbles, as other urethane sealants often do. Its excellent self leveling properties and smooth finish allow NovaLink SL to be installed without tooling. The elimination of masking tape and tooling results in a significant reduction in labor. NovaLink SL is solvent free and will not shrink. Its excellent adhesion to clean masonry or concrete allows it to be installed without a primer in most joints smaller than 1/2 inch wide.

  • NovaLink SL will not outgas or bubble when applied to damp concrete.
  • NovaLink SL is isocyanate free, paintable and validated for ± 25% joint movement.
  • Case Quantity: (24) 10.1 Oz Tubes

Applicable Performance Standards:

  • ASTM C920, Type S, Grade P, Class 25, Uses T2, M,& O
  • Federal Specification TT-S-00230-C Type I, Class B
  • Corps of Engineers CRD-C-541, Type I, Class B
  • Canadian Standards Board CAN 19, 13-M82 Regulatory Compliance
  • Conforms to OTC Rule for Sealants
  • Meets requirements of California Regs: CARB and SCAQMD
  • This product does not contain cancer causing chemicals listed in California Proposition 65.
  • Conforms to USDA Requirements for Non-food Contact
More Information
SKU CHE-F1234
Manufacturer Part Number F1234
Manufacturer CHEM LINK
Weight 25lb
Country of Manufacture United States
Product Sheet (778.74 kB)
Safety Sheet (251.81 kB)

INSTALLATION Bonding surfaces should be clean, dry and free from all contamination that may inhibit the sealant’s performance. Isopropyl alcohol is an effective cleaner for surface preparation. Install all joint applications per ASTM and SWRI recommendations and guidelines. Please contact customer service for application guidelines for temperatures below 32 degrees F (0 degrees C).

Maintain sealant at room temperature before application to ensure adequate tooling and adhesion. This product sets rapidly upon exposure to moisture.