Durasil SL - Pourable Self-Leveling Sealant (Case of 4)

In stock
Check for local delivery

NEUTRAL CURE will not promote metal corrosion

SOLVENT FREE 100% solids, will not shrink

COLOR STABILITY good stability, will not suntain

SELF LEVELING no special tools required

TEMP RANGE apply at temps as low as 32F

Financing Available for orders over $1,000


  • DuraSil SL is an oxime (neutral) cure silicone sealant designed for use in pitch pans and warranted E-Curb penetration seals.

  • DuraSil SL is suitable for hot pipe applications up to 400°F (204°C).

  • DuraSil SL’s low durometer and resilient “elastomeric” properties accommodate greater movement in penetration seals.

  • DuraSil SL is solvent free, contains no isocyanates and will not shrink upon curing.

More Information
Manufacturer ChemLink
Weight 5lb
Country of Manufacture United States


  • Bonding surfaces should be clean, dry and free from all contamination that may inhibit the sealant’s performance.

  • Brush away all gravel or loose granules.

  • Isopropyl alcohol is an effective cleaner for surface preparation.

  • Do not extend DuraSil SL with foreign materials or liquids.

  • The seal surface will skin over and will be water tight in approximately 1 hour.

  • Do not use if rain is anticipated within 4 hours.

  • Please contact customer service for application guidelines with temperatures below 32°F (0°C).

  • Do not use on TPO without the use of TPO primer.

  • Do not use on Hypalon.

  • Smooth APP membranes require a granulated target.

  • This product sets rapidly upon exposure to moisture.

Only available through Chem Link distributors.